Table 3. WAC104 AP specifications (Continued)
DescriptionFeature
Four 10/100/1000BASE-T Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X)LAN
IEEE 802.11ac specification
IEEE 802.11n 2.0 specification
IEEE 802.11g
IEEE 802.11b
IEEE 802.11a
WiFi standards
2.4 GHz and 5 GHz, concurrent operationRadio bands
300 Mbps in the 2.4 GHz band and 867 Mbps in the 5GHz band
Note: Throughput can vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and
network overhead, affect the data throughput rate.
Maximum theoretical WiFi
throughput
The AP can support a maximum of 64 WiFi clients:
Maximum number of 2.4 GHz WiFi clients: 64
Maximum number of 5 GHz WiFi clients: 64
Even though each individual radio can support 64 clients, the total number of
clients that the AP can support is 64. (For example, 44 clients on the 2.4 GHz
radio and 20 clients on the 5 GHz radio.)
Note: In a WiFi network, the number of clients is limited by the amount of WiFi
traffic that is generated by each client.
Maximum number of
supported clients
US: 2.412–2.462 GHz
Europe: 2.412–2.472 GHz
Australia: 2.412–2.472 GHz
Japan: 2.412–2.472 GHz
Operating frequency range
in the 2.4 GHz band
US: 5.180–5.240 + 5.745–5.825 GHz
Europe: 5.180–5.240 GHz
Australia: 5.180–5.240 + 5.745–5.825 GHz
Japan: 5.180–5.240 GHz
Operating frequency range
in the 5 GHz band
WPA2-PSK, WPA and WPA2 (mixed mode), WPA/WPA2 Enterprise, and WEP802.11 security
User Manual94Factory Default Settings and
Technical Specifications
802.11ac Wireless Access Point Model WAC104