Table 2. WAC104 AP factory default settings (Continued)
Default SettingFeature
2346Fragmentation length
2347CTS/RTS threshold
Long PreamblePreamble mode
Automatic, nonconfigurable
Note: Throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and
construction, and network overhead, affect the data throughput rate.
Transmission speed
100%, nonconfigurableRadio transmission power
Enabled, nonconfigurable802.11e WMM
WPS
EnabledWPS capability
Enabled. For more information, see Manage the WPS settings on page
73.
AP’s PIN
EnabledKeep Existing Wireless
Settings
Technical specifications
The following table shows the technical specifications of the AP.
Table 3. WAC104 AP specifications
DescriptionFeature
12V, 1.5A (18W)
The plug is localized to the country of sale.
Power consumption 8.1W maximum
Power adapter
9.43 x 7.16 x 1.61 in. (239.65 x 181.45 x 40.6 mm)Dimensions (L x W x H)
0.85 lb (385 g )Weight
32º to 104ºF (0° to 40°C)Operating temperature
10 to 90% maximum relative humidity, noncondensingOperating humidity
–20º to 70ºF (–4° to 158°C)Storage temperature
5 to 95% maximum relative humidity, noncondensingStorage humidity
User Manual93Factory Default Settings and
Technical Specifications
802.11ac Wireless Access Point Model WAC104