EDH0170FE1010 – 09/98 38
LDS1000 Controller for Laser Diode Sensors
10.4 List of Commands
10.4.1 Commands Listed by Category
10.4.1.1 System Management
Command Description
ML Set Manual mode.
MR Set Interface Mode.
RD Frozen display.
RE Active display.
RS Reset system.
TB Read error.
TE Read error code.
TS Read operational status.
VE Read Soft version.
10.4.1.2 Reading Current Sensor Parameters
Command Description
TA Read current sensor parameters.
TN Reading sensor number and series number.
10.4.1.3 Classical Acquisitions
Command Description
KI Define the integration constant.
TP Read current measurement.
XI Read integration constant.
10.4.1.4 Dynamic Acquisitions
Command Description
MS Read acquisition status.
SP Define sample period
ST Stop current acquisitions.
TK Acquisitions with trigger on TRIG input.
TM Immediate acquisitions.
TQ Acquisitions with synchronization on TRIG input.
TT Re-read acquisitions.
XN Read number of measurements in memory.
XS Read sample period.
10.4.1.5 Reading Logical Inputs/Outputs
Command Description
RB Read TRIGG input status.
RO Read PWOK output status.
To Next Page
Loading...
Need help?
General
