Newport LDS1000 - Sensor Interface Cable: SENSOR Connector; Analog Output Cables: “OUT Y” & “OUT Z Connectors; Measurement Synchronization Input Cable: “TRIG” Connector; Beam Signal Output Cable: “PWOK” Connector

61 EDH0170FE1010 – 09/98
LDS1000 Controller for Laser Diode Sensors
11.3.3 Sensor Interface Cable: “SENSOR” Connector
WARNING
Use the cable supplied with the NEWPORT sensor.
11.3.4 Analog Output Cables: “OUT Y” & “OUT Z” Connectors
WARNING
Use sheathed commercial cables that are <3 meters in length.
11.3.5 Measurement Synchronization Input Cable: “TRIG” Connector
WARNING
Use sheathed commercial cable that is <3 meters in length.
11.3.6 Beam Signal Output Cable: “PWOK” Connector
WARNING
Use sheathed commercial cable that is <3 meters in length.
A
B
C
L
D
E
F
G
M
J
H
K
A
B
C
D
E
F
G
H
J
K
L
M
Channel 1 direction + and -
Ø analog
Channel 2 direction + and -
-TOK (Security Laser)
+12 V
-12 V
0 V laser
-9 V laser
Ø analog
+TOK (Security Laser)