53 EDH0170FE1010 – 09/98
LDS1000 Controller for Laser Diode Sensors
Related commands KI Define the integration constant.
TB Read error.
TE Read error code.
TK Acquisitions with trigger on TRIGG input.
XN Read number of measurements in the memory.
10.5.20 TS Read Operational Status
Use h MNL j RMT j ACT
Syntax TS
Parameter None.
Description Read acquisition status. The return value is an ASCII character
the code of which should be translated into binary:
•Bit 0= 0: Standard memory.
= 1: Extended memory.
•Bit 1= 0: Frozen display mode.
= 1: Refreshed display mode.
•Bit 2= 0
•Bit 3= 0
•Bit 4= 0
•Bit 5= 0
•Bit 6= 1
•Bit 7= 0
Table for reading messages received:
@ : Standard memory (2048) and frozen display.
B : Standard memory(2048) and active display.
A : Extended memory (14336) and frozen display.
C : Extended memory(14336) and active display.
Response TSaa aa is an ASCII character.
Errors D Execution not allowed.
S Communication time-out.
Example TS |Read operational status.
TS@ |Standard memory and frozen display.
Related commands TB Read error.
TE Read error code.
To Next Page
Loading...
