Newport LDS1000 - MR Set Interface Mode

EDH0170FE1010 – 09/98 42
LDS1000 Controller for Laser Diode Sensors
10.5.03 MR Set Interface Mode
Use j MNL h RMT h ACT
Syntax MR
Parameter None.
Description Set Interface Mode from Manual mode (manual mode in main
menu).
Response None.
Error D Execution not allowed.
Example MR |Set Interface Mode.
REMARQUE
The controller then displays LDS1000 REMOTE MODE.
Related commands ML Set manual mode.
RD Frozen display.
RE Active display.
TB Read error.
TE Read error code.