NG-MB1/NG-MB2 User Manual
Page | 43 Copyright©2022 NGTeco. All rights reserved.
5. After downloading the template, a success message will be displayed as shown below:
6. Now, insert the USB drive into your PC. The Wi-Fi configuration file will be downloaded
as shown below:
7. Modify the template file by entering the SSID and Password.
8. Save the file and again insert the USB drive to the device.
9. Go to [Comm.] then [Wi-Fi Setup by USB].
10. Then select [Upload].
11. The device will be connected to the configured Wi-Fi with the uploaded SSID and
Password.
To Next Page
Loading...
