NGTeco NG-MB2 - System Info

NG-MB1/NG-MB2 User Manual
Page | 74 Copyright©2022 NGTeco. All rights reserved.
13 System Info
You can check the storage status as well as the firmware information of the device through
the [System Info] option.
Go to [System Info] and press <M/OK>.
Select the specific option to check the parameters:
 Device Usage: Displays the Number of users, Admin users, Password, Fingerprint,
Face, Card ★ and Attendance record.
 Device Info (Information): Displays the Device name, Serial number, MAC
address, Fingerprint algorithm, Face algorithm, Platform information, MCU version,
Manufacturer and Manufacturer date.
 Firmware Info: Displays the Firmware version and other version information of
the device.