NG-MB1/NG-MB2 User Manual
Page | 75 Copyright©2022 NGTeco. All rights reserved.
14 Connect to NGTeco Time App
The App Connection interface allows you to connect the NGTeco Time Mobile app with the
device. Once connected, you can perform User management, Report management, etc. on
the Mobile app. The process is as follows:
1. Download and install the NGTeco
Time App on your phone.
2. Connect the mobile and device to
the same Wi-Fi network.
3. Select [Comm.] and then [App
Connection] to view the QR code.
4. Enter the Password and Confirm.
1. Open the NGTeco Time App and
press to scan the QR code
from the device.
2. After a successful connection, you
can set the device parameters from
your mobile.
To Next Page
Loading...
