NG-MB1/NG-MB2 User Manual
Page | 56 Copyright©2022 NGTeco. All rights reserved.
Perform the following steps to set the Semi-Monthly Pay Period:
1. Go to [Pay Period].
2. Press <M/OK> to view the available pay period options.
3. Select [Semi-Monthly Pay Period].
Start date of first half month: The first half of the month is calculated from this
day.
Start date of second half month: The second half of the month starts from this
day.
Start day of the week: It means that the start of the week is counted from this
day.
4. Then, press <
> to navigate and set the start day of the first and second half of the
month.
5. Then, press <
> to navigate and set the start day of the week.
6. Navigate to [M/OK to Save] and press <M/OK>.
To Next Page
Loading...
