General
FIGHTER 360P
2
Installation date
Installer
The serial number (103)
, should always be stated with all
correspondence with NIBE.
089
___________
Chosen output, immersion heater
Pre-pressure in the expansion tank (0.5 bar on delivery)
Circulation pump setting
Selected fan curve, normal speed
Selected fan curve, speed I
Selected fan curve, speed II
Setting Heating curve selection
Setting Offset heating curve
To be filled in when the heat pump has been
installed
In order to get the ultimate benefit from your heat
pump FIGHTER 360P you should read through this
Installation and Maintenance Instruction.
FIGHTER 360P is an exhaust air heat pump. This
means that it collects the energy in the
ventilation air and uses it for hot water and room
heating.
Microprocessors ensure that the heat pump always
works efficiently.
FIGHTER 360P is a Swedish-made quality product
which will last a long time and run reliably without
unpleasant surprises.
For Home Owners
To Next Page
Loading...
