NKT Photonics SUPERK SELECT - Figure 38 VIS;NIR Output with All Channels on; Figure 39 NIR;IR Output with All Channels on

To Next Page

To Previous Page

Control panel

Figure 38 VIS/NIR output with all channels ON

Note: To operate 8 channels in both the VIR/NIR and NIR/IR band views simulta-

neously, two External RF Drivers must be equipped with the system. If only one

ERD is equipped and RF power is ON, the currently displayed crystal will operate.

The system will lock access to the other crystal.

Figure 39 NIR/IR output with all channels ON

Dragging channels

Using your mouse, you can click-hold on a channel symbol and slide it within the

band view, thereby adjusting the wavelength and power level – see Figure 40.

Buttons toggled to green

Text fields to enter

Channels shown

appear in the band

view when ON

X axis - wavelength nm

Y axis - power level %

indicate the channel is

the channel’s wavelength

and power level