NKT Photonics SUPERK SELECT User Manual

55
Control panel
Figure 42 Wavelength sweep
Wavelength sweep example
In Figure 42, Wavelength sweep mode is set to perform the following sweep:
• Start wavelength is 400 nm
• Stop wavelength is 500 nm
• Step size is 50 nm
• Step interval is 5 seconds
• Channel power is 50%
For this example, three wavelengths are repeatedly selected: 400, 450 and 500
nm. The system emits 400 nm for 5 seconds then 450 nm for 5 seconds and
finally 500 nm for 5 seconds before repeating the sweep. You can set the
controls as desired to achieve any sweep possible within the setting limits.

NKT Photonics SUPERK SELECT Specifications

General

Brand	NKT Photonics
Model	SUPERK SELECT
Category	Water Filtration Systems
Language	English