Nokia 7210 - Page 105

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
File System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
105
For example:
To copy a file named srcfile in a directory called test on cf1 to a file called destfile in a
directory called production on cf1, the syntax is:
sr1>file cf1:\ # copy cf2-/test/srcfile/production/destfile
To FTP a file named 121201.cfg in directory mydir stored on cf1 to a network FTP server with
IP address 192.0.2.79 in a directory called backup with a destination file name of 121201.cfg,
the FTP syntax is:
copy /mydir/121201.cfg 192.0.2.79/backup/121201.cfg
Parameters source-file-url — Specifies the location of the source file or directory to be copied.
dest-file-url — Specifies the destination of the copied file or directory.
Values
force — Keyword to force an immediate copy of the specified file(s).
file copy force — Keyword to execute the command without displaying a user prompt
message.
delete
Syntax delete file-url [force]
file-url — local-url | remote-url
local-url — [cflash-id/ | usb-flash-id] [file-path]
remote-url — [{ftp:// | tftp://} login:pswd@remote-locn/] [file- path]
remote-locn — [hostname | ipv4-address | ipv6-address]
ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — a string up to 32, for link local addresses
cflash-id or usb-flash-id — uf1: (7210 SAS-M)
cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx/S 1/10GE:
standalone and standalone-VC, 7210 SAS-Sx 10/
100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B: (7210 SAS-R6
and 7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx/S 1/10GE: standalone and
standalone-VC)