System Management
520
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
The no form of this command specifies that the software does not allocate any resources for
use by egress filter policies. If no resources are allocated for use, the software fails all
attempts to associate a service entity (for example, SAP and IP interface) with a filter policy
using any of the match criteria.
Parameters num-resources — Specifies the amount of resources that can be allocated for use by
ACL policies.
Values Table 44 lists the parameter values.
egress-sap-aggregate-meter
Syntax [no] egress-sap-aggregate-meter num-resources
Context configure>system>resource-profile>egress-internal-tcam
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-T (network and access-uplink),
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC, 7210 SAS-Sx 10/100GE,
7210 SAS-R6 and 7210 SAS-R12
Table 44 Number of Resources Available for ACL-SAP-Egress
Platforms Min value
(per node)
Max value
(per node)
Default Values
7210 SAS-M (per node) 0 2 2
7210 SAS-T Network mode (per node) 0 2 2
7210 SAS-R6 (per IMMv1) 0 2 2
7210 SAS-R6 and 7210 SAS-R12(per
IMMv2)
022
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
022
7210 SAS-Mxp (per node) 0 2 2
7210 SAS-Sx 1/10GE (per node)
(standalone)
022
7210 SAS-Sx 1/10GE (standalone-VC) 0 2 2
7210 SAS-S 1/10GE (per node)
(standalone)
022
7210 SAS-S 1/10GE (standalone-VC) 0 2 2
7210 SAS-Sx 10/100GE (per node) 0 2 2