7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
CLI Usage
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
69
tree
Syntax tree [detail]
Context <GLOBAL>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command displays the command hierarchy structure from the present working context.
Parameters detail — Keyword to include parameter information for each command displayed in the
tree output.
write
Syntax write {user | broadcast} message-string
Context <GLOBAL>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command sends a console message to a specific user or to all users with active console
sessions.
Parameters user — Specifies the name of a user with an active console session to which to send a
console message.
Values any valid CLI username
broadcast — Keyword to send the message-string to all users logged into the router.
message-string — Specifies the message string to send. Allowed values are any string
up to 250 characters composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, and others), the entire string must be
enclosed within double quotes.
2.9.2.2 CLI Environment Commands
alias
Syntax alias alias-name alias-command-line
no alias alias-name
Context environment
To Next Page
Loading...
