Nokia 7210 - System Port LAG MAC Assignment Commands for 7210 SAS-Mxp Standalone, 7210 SAS-T, 7210 SAS-Sx 10100 GE Standalone, and 7210 SAS-SxS 110 GE: Standalone and Standalone-VC; System Alarm Contact Commands; System Synchronization Commands for 7210 SAS-M

System Management
376
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
6.12.1.13 System Port LAG MAC Assignment Commands for
7210 SAS-Mxp standalone, 7210 SAS-T, 7210 SAS-Sx 10/
100GE standalone, and 7210 SAS-Sx/S 1/10GE: standalone
and standalone-VC
config
— system
— port-lag-mac-assignment [v1-enable]
—no port-lag-mac-assignment
6.12.1.14 System Alarm Contact Commands
config
— system
— alarm-contact-in-power {on|off}
— alarm-contact-input alarm-contact-input-id
— [no] alarm-output-severity [critical | major | minor | none]
— [no] clear-alarm-msg {alarm-msg-txt}
— description description-string
— normal-state [open | closed]
— [no] shutdown
— [no] trigger-alarm-msg {alarm-msg-txt}
6.12.1.15 System Synchronization Commands for 7210 SAS-M
config
— system
— sync-if-timing
— abort
— begin
— commit
— ref-order first second third
—no ref-order
— ptp
— ql-override {prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec}
—no ql-override
— [no] shutdown
— ref1
— ql-override {prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}
—no ql-override
— [no] shutdown
— source-port port-id
—no source-port
— ref2
— ql-override
{prs | stu | st2 | tnc | st3e | st3 | prc | ssua | ssub | sec | eec1 | eec2}