Nokia 7210 - Clear Commands; Debug Commands; Command Descriptions; Configuration Commands

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
391
6.12.1.33 Clear Commands
clear
— screen action-name [owner owner-name]
— system
— ptp inactive-peers
— ptp peer ip-address statistics
— ptp statistics
— port port-id statistics
— script-control
— script-policy
— completed [script-policy-name] [owner owner-name]
— sync-if-timing {ref1 | ref2}
— sync-if-timing {ref1 | ref2 | bits1 | bits2}
6.12.1.34 Debug Commands
debug
— sync-if-timing
— force-reference {ref1 | ref2 | ptp}
— force-reference {ref1 | ref2 | bits1 | bits2 | ptp}
—no force-reference
— [no] system
— ntp [router router-name] [interface ip-int-name]
6.12.2 Command Descriptions
• Configuration Commands
• Show Commands
• Clear Commands
• Debug Commands
6.12.2.1 Configuration Commands
• Generic Commands
• System Information Commands
• System Alarm Commands
• PTP Commands
• Date and Time Commands