Nokia 7210 - Tech-Support

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
349
The following is a portion of the sample configuration output of the display-config
detail command.
A:ALA-12>admin# display-config detail
#------------------------------------------
echo "System Configuration"
#------------------------------------------
system
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
config-backup 7
boot-good-exec "ftp://test:test@192.168.xx.xxx/./1xx.cfg.A"
boot-bad-exec "ftp://test:test@192.168.xx.xxx/./1xx.cfg.1"
lacp-system-priority 1
no synchronize
snmp
shutdown
engineID "0000197f000000000467ff00"
packet-size 1500
general-port 161
exit
login-control
ftp
inbound-max-sessions 3
exit
telnet
inbound-max-sessions 5
outbound-max-sessions 2
exit
idle-timeout 1440
pre-login-message "Property of Service Routing Inc.
Unauthorized access prohibited."
motd text “Notice to all users: Software upgrade scheduled
3/2 1:00 AM"
exit
security
management-access-filter
default-action permit
entry 1
no description
...
6.11.4.6 Tech-support
The tech-support command creates a system core dump.
Note: This command should only be used with explicit authorization and direction from
Nokia’s Technical Assistance Center (TAC).