Nokia 7210 - Table 62 Number of Resources Available for SAP-Aggregate-Meter

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
561
qos
Syntax qos
Context configure>system>resource-profile
Platforms 7210 SAS-T (network and access-uplink), 7210 SAS-Mxp
Description Commands in this context configure QoS parameters.
mbs-pool
Syntax mbs-pool {node | port}
Context configure>system>resource-profile>qos
Platforms 7210 SAS-T (network and access-uplink)
Description On 7210 SAS-T, the user has an option to configure the MBS pool per node or per port. This
command allows the user to configure the MBS pool as per their requirement. A reboot is
needed whenever the value of this parameter is changed for the new values to take effect.
If the users configure a per node MBS pool, then each of the 8 queues available on a port is
allocated a CBS amount of committed buffers. The remaining amount of buffers is allocated
towards the MBS pool that is available for sharing among all the queues across all the ports
of the node. In other words the MBS pool is per node.
If the users configure a per port MBS pool, the available buffers are equally divided up among
the all the ports of the node. With this scheme of allocation, each port gets some portion of
the buffers for its exclusive use. Some of these buffers are allocated towards the CBS per
queue and the rest is assigned to the per port MBS pool. To allow operators better control
over which ports get larger portion of queue buffers, operator is provided with an option to
decommission ports. The commands associated with decommissioning of ports are only
allowed when the node is booted with the option to use per-port MBS pool. In other words,
decommission entries are executed only if the mbs-pool parameter is set to port.
7210 SAS-S 1/10GE (per node)
(standalone)
033
7210 SAS-S 1/10GE (standalone-VC) 0 3 2
7210 SAS-Sx 10/100GE (per node) Not
Supported
Not
Supported
Not Supported
Table 62 Number of Resources Available for SAP-Aggregate-Meter
Platforms Min value
(per node)
Max value
(per node)
Default
Values