System Management
678
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command allows an operator to clear the Telnet or console screen.
ptp
Syntax ptp inactive-peers
ptp statistics
ptp peer ip-address statistics
Context clear>system
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
Description This command clears PTP statistics.
Parameters inactive-peers — Keyword to remove PTP peers which are not currently exchanging
PTP packets with the router
peer ip-address statistics — Clears statistics for the specified peer.
statistics — Clears all PTP statistics.
port
Syntax port port-id statistics
Context clear>system>ptp
Platforms 7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
Description This command clears PTP port information.
Parameters port-id — Clears information for the specified port.
statistics — Clears statistics information for the specified port.
script-control
Syntax script-control
Context clear>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
To Next Page
Loading...
