System Management
392
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
• System Synchronization Commands
• Generic Commands
• System Administration Commands
• System Alarm Contact Commands
• Redundancy Commands
• Rollback Commands
• Peer Commands
• MC-LAG Commands
• LLDP System Commands
• LLDP Ethernet Port Commands
• System Resource-Profile Commands
• Global System Resource Profile Commands
6.12.2.1.1 Generic Commands
shutdown
Syntax [no] shutdown
Context config>system>ptp
config>system>time>ntp
config>system>time>sntp
config>system>cron>sched
config>system>script-control>script-policy
config>system>script-control>script
config>system>sync-if-timing>ref1
config>system>sync-if-timing>ref2
config>redundancy>multi-chassis>peer
config>redundancy>multi-chassis>peer>mc-lag
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command administratively disables the entity. When disabled, an entity does not
change, reset, or remove any configuration settings or statistics.
Note: The config>redundancy>multi-chassis>peer and config>redundancy>multi-
chassis>peer>mc-lag contexts are not supported on 7210 SAS platforms configured in the
access-uplink operating mode
To Next Page
Loading...
