Nokia 7210 - Page 509

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
509
tx-hold-multiplier
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context config>system>lldp
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the multiplier of the tx-interval.
Parameters multiplier — Specifies the multiplier of the tx-interval.
Values 2 to 10
Default 4
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the LLDP transmit interval time.
Parameters interval — Specifies the LLDP transmit interval time.
Values 5 to 32768
Default 30
6.12.2.1.17 LLDP Ethernet Port Commands
lldp
Syntax lldp
Context config>port>ethernet
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode