Nokia 7210 - Page 108

File System Management
108
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Description This command enables access to the context to enter and perform file system operations.
When entering the file context, the prompt changes to reflect the present working directory.
Navigating the file system with the cd command results in a changed prompt.
The exit all command leaves the file system/file operation context and returns to the <root>
CLI context. The state of the present working directory is maintained for the CLI session.
Entering the file command returns the cursor to the working directory where the exit
command was issued.
format
Syntax format cflash cflash-id
Context root>file
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command formats the compact flash. The compact flash must be shutdown before
starting the format.
Parameters cflash-id — Specifies the compact flash type.
Values cflash-id — uf1: (7210 SAS-M)
cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx/S 1/10GE:
standalone and standalone-VC, 7210 SAS-Sx 10/100GE, and
7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B: (7210 SAS-R6
and 7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx/S 1/10GE: standalone and
standalone-VC)
md
Syntax md file-url
Context file
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command creates a new directory in a file system.
Directories can only be created one level at a time.