Nokia 7210 - Page 193

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
193
cf1:|cf2:|uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
secondary-config
Syntax secondary-config file-url
no secondary-config
Context bof
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the name and location of the secondary configuration file.
The system attempts to use the configuration as specified in secondary-config if the primary
config cannot be located. If the secondary-config file cannot be located, the system
attempts to obtain the configuration from the location specified in the tertiary-config.
If an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the secondary-config configuration.
Parameters file-url — The secondary configuration file location, expressed as a file URL.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-idcf1:, cf2
usb-flash-id uf1:
uf1: (7210 SAS-M)
cf1:|cf2:|uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
secondary-image
Syntax secondary-image file-url
no secondary-image
Context bof