Nokia 7210 - Page 480

System Management
480
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
chassis-role — Specifies the operating mode of the chassis at boot up. This keyword is
only supported on 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, and
7210 SAS-Mxp platforms.
Values factory-default, satellite, standalone
save
Syntax save [file-url] [detail] [index]
Context admin
Platforms Supported on all 7210 SAS platforms as described in this document
Description This command saves the running configuration to a configuration file. For example:
A:ALA-1>admin# save ftp://test:test@192.168.x.xx/./100.cfg
Saving configuration .........Completed.
By default, the running configuration is saved to the primary configuration file.
Parameters file-url — Specifies the file URL location to save the configuration file.
Values file-url — local-url | remote-url
local-url — [cflash-id/] [file-path]
255 chars maximum, including cflash-id
directory length 99 characters maximum each
remote url — [{ftp:// | tftp://}login:password@remote-location/][file-
path]
255 characters maximum
directory length 99 characters maximum each
remote-location — [hostname | ipv4-address | ipv6-address]
ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — 32 characters maximum, for link
local addresses