7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
CLI Usage
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
57
saa — Clears the SAA test results.
screen — Clears the console or telnet screen.
service — Clears service ID and statistical entities.
system — Clears or re-enables a previously failed reference.
tacplus — Clears the TACACS+ server state.
trace — Clears the trace log.
echo
Syntax echo [text-to-echo] [extra-text-to-echo] [more-text]
Context <GLOBAL>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command echoes arguments on the command line. The primary use of this command is
to allow messages to be displayed to the screen in files executed with the exec command.
Parameters text-to-echo — Specifies a text string to be echoed up to 256 characters.
extra-text-to-echo — Specifies more text to be echoed up to 256 characters.
more-text — Specifies more text to be echoed up to 256 characters.
exec
Syntax exec [-echo] [-syntax] {filename | [eof_string]}
Context <GLOBAL>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command executes the contents of a text file as if they were CLI commands entered at
the console.
Exec commands do not have no versions.
The following commands are related to the exec command:
• boot-bad-exec
Use this command to configure a URL for a CLI script to exec following a failed
configuration boot.
• boot-good-exec
To Next Page
Loading...
