System Management
582
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
cpu
Syntax cpu [sample-period seconds]
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays CPU utilization per task over a sample period.
Parameters sample-period seconds — Specifies the number of seconds over which to sample CPU
task utilization.
Default 1
Values 1 to 5
Output The following output is an example of CPU information, and Table 66 describes the output
fields.
Sample Output
*A:cses-E11# show system cpu sample-period 2
===============================================================================
CPU Utilization (Sample period: 2 seconds)
===============================================================================
Name CPU Time CPU Usage Capacity
(uSec) Usage
-------------------------------------------------------------------------------
BFD 10 ~0.00% ~0.00%
BGP 0 0.00% 0.00%
CFLOWD 61 ~0.00% ~0.00%
Cards & Ports 8,332 0.41% 0.08%
DHCP Server 79 ~0.00% ~0.00%
ICC 408 0.02% 0.01%
IGMP/MLD 1,768 0.08% 0.08%
IOM 17,197 0.85% 0.31%
IP Stack 4,080 0.20% 0.09%
IS-IS 1,213 0.06% 0.06%
ISA 2,496 0.12% 0.07%
LDP 0 0.00% 0.00%
Logging 32 ~0.00% ~0.00%
MPLS/RSVP 2,380 0.11% 0.08%
MSDP 0 0.00% 0.00%
Management 5,969 0.29% 0.15%
OAM 907 0.04% 0.02%
OSPF 25 ~0.00% ~0.00%
PIM 5,600 0.27% 0.27%
RIP 0 0.00% 0.00%
RTM/Policies 0 0.00% 0.00%
Redundancy 3,635 0.18% 0.13%
SIM 1,462 0.07% 0.04%
SNMP Daemon 0 0.00% 0.00%
Services 2,241 0.11% 0.05%
Stats 0 0.00% 0.00%
Subscriber Mgmt 2,129 0.10% 0.04%
To Next Page
Loading...
