Nokia 7210 - Page 65

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
CLI Usage
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
65
count requests — Specifies the number of ping requests to send to the remote host,
expressed as a decimal integer.
Default 5
Values 1 to 10000
do-not-fragment — Specifies that the request frame should not be fragmented. This
option is particularly useful in combination with the size parameter for maximum MTU
determination.
router router-instance — Specifies the router name or service ID.
Default Base
Values router-name: Base, management
service-id: 1 to 2147483647
timeout timeout — Specifies the timeout in seconds.
Default 5
Values 1 to 10
service-name service-name — Specifies a unique service name, up to 64 characters to
identify the service.
Values [64 chars max]
pwc
Syntax pwc [previous]
Context <GLOBAL>
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command displays the present or previous working context of the CLI session. The pwc
command provides a user who is in the process of dynamically configuring a chassis a way
to display the current or previous working context of the CLI session. The pwc command
displays a list of the CLI nodes that hierarchically define the current context of the CLI
instance of the user.
The following is a sample configuration output.
A:Dut-G>config>service>vpls# pwc
-------------------------------------------------------------------------------
Present Working Context :
-------------------------------------------------------------------------------
<root>
configure
service
vpls 1
-------------------------------------------------------------------------------
A:Dut-G>config>service>vpls#