2 Installing the Nokia IP390 Appliance
34 IP390, 105i & 105s Security Platform Installation Guide
Note
To use the cable for modem connections from the auxiliary port, you need
to order a modem cable kit. For information about contacting Nokia to
order the kit, see “Nokia Contact Information” on page 3.
Note
The cable described in this section is a rollover cable, which is required
for IP390 console and auxiliary port connections. You cannot use
standard Ethernet cables for console and auxiliary connections.
To connect the cable, push the connector into the receptacle, as you would
with other similar cables. To disconnect the cable, push the cable toward the
To Next Page
Loading...