Nord Drivesystems NORDAC LINK SK250E-FDS - Table 7: Overview According to Product Standard en 61800-3

8 Additional information
BU 0250 en-3021 187
EMC overview of standards that are used in accordance with EN 61800-3
as checking and measuring procedures:
Interference emission
Cable-related emission
(interference voltage)
EN 55011
C2
-
Radiated emission
(interference field strength)
EN 55011
C2
C3 (size 2)
Interference
immunity EN 61000-6-1, EN 61000-6-2
ESD, discharge of static electricity
EN 61000-4-2
6 kV (CD), 8 kV (AD)
EMF, high frequency electro-magnetic
fields
EN 61000-4-3 10 V/m; 80 – 1000 MHz
Burst on control cables
EN 61000-4-4
1 kV
Burst on mains and motor cables
EN 61000-4-4
2 kV
Surge (phase-phase / phase-ground)
EN 61000-4-5
1 kV / 2 kV
Cable-led interference due to high
frequency fields
EN 61000-4-6 10 V, 0.15 – 80 MHz
Voltage fluctuations and drops
EN 61000-2-1
+10 %, -15 %; 90 %
Voltage asymmetries and frequency
changes
EN 61000-2-4 3 %; 2 %
Table 7: Overview according to product standard EN 61800-3
Pos: 652 /Allgemein/A llgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_14763696959 06_0.docx @ 2265495 @ @ 1