Nord Drivesystems NORDAC LINK SK250E-FDS - Option Slots and Equipment Versions; Option Slots; Connection Level

2 Assembly and installation
BU 0250 en-3021 29
Pos: 60 /Anleitungen/ Elektronik/FU und St arter/2. Montage und Inst allation/Montage/ FDS [SK xxxE-FDS]/Opti onsplätze und Aussta ttungsvarianten [SK xxxE-FDS] @ 48\mod_159714749 4107_388.docx @ 2660868 @ 2 @ 1
2.2 Option slots and equipment versions
The device is configured according to the customer specification. No options can be retrofitted. All
options must be recorded by NORD when ordering and before the production process.
Defined positions on the device apply for the selected options and features. Dependencies between
the selected options and on relevant signalling devices (LEDs) or parameter settings are explained in
this instruction.
Pos: 61 /Anleitungen/ Elektronik/FU und St arter/2. Montage und Inst allation/Montage/ FDS [SK xxxE-FDS]/Opti onsplätze_01 [ SK xxxE-FDS] @ 11\mod_1464873590 326_388.docx @ 326378 @ 3 @ 1
2.2.1 Option slots
The device is divided into 3 levels. Each of these levels is intended for the installation of certain
options or option groups.
Pos: 62 /Anleitungen/ Elektronik/FU und St arter/2. Montage und Inst allation/Montage/ FDS [SK xxxE-FDS]/Optionsplätze_02-Anschlussebene [SK xxxE-FDS] @ 11\mod_1465213149633_3 88.docx @ 327074 @ 4 @ 1
2.2.1.1 Connection level
Position: bottom
The configuration and assignment of the
power connections (mains and motor
connections) depends on the customer's
specification for the product.
This also applies for the additional option
slots for the signal connections.
X1 =
…
X4 =
Z1 =
…
Z4 =
Power connection 1
…
Power connection 4
Additional signal connections
Pos: 63 /Allgemein/Al lgemeingültige Modu le/---------Seitenumbruch kompakt --------- @ 13\mod_147636969590 6_0.docx @ 2265495 @ @ 1