Nord Drivesystems NORDAC LINK SK250E-FDS - Description of Parameters

5 Parameter
BU 0250 en-3021 83
Pos: 234 /Anleitungen/ Elektronik/F U und Starter/5. Parameter/ Allgemein/Parameter beschreibung_01 [ SK 1xxE, SK 2xxE, SK 2xxE-FDS, POSICON, Safety] @ 9\mod_1447147899292_388.doc x @ 261908 @ 2 @ 1
5.2 Description of parameters
Pos: 235 /Anleitungen/ Elektronik/F U und Starter/5. Parameter/ Allgemein/Parameter beschreibung_02 [ SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 9\mod_1447407455915_38 8.docx @ 263304 @ @ 1
1
Parameter number
2
Array values
3
Parameter text; top: Display in ParameterBox, bottom: Meaning
4
Special features (e.g. only available in device model SK xxx)
5
(S) Parameter of type Supervisor,

depending on setting in P003
6
(P) Parameter, to which different values can be assigned depending on the selected parameter set
(selection in P100)
7
Parameter value range
8
Description of parameters
9
Factory settings (default value) of parameter
Pos: 236 /Anleitungen/ Elektronik/F U und Starter/5. Parameter/ Allgemein/Parameter beschreibung_04 [ SK 1xxE, SK 2xxE, SK xxxE-FDS] @ 9\mod_1447406517749_388. docx @ 263271 @ @ 1
Array parameter display
Some parameters have the option of displaying settings and views in several levels ("arrays"). After
the parameter is selected, the array level is displayed and must then also be selected.
If the SimpleBox SK CSX-3H is used, the array level is shown by _ - 0 1. With the ParameterBox
SK PAR-3H (picture on right) the selection options for the array level appear at the top right of the
display (Example: [01]).
Array display:
SimpleBox SK CSX-3H
P 01
P
420
P 02
1
0
Meaning:
Digital input 1,
enable right function
Meaning:
Digital input 2,
no function
ENTER
ENTER
ENTER
VALUE
1
Parameter number
2
Array
ParameterBox SK PAR-3H
1
Parameter number
2
Array
Pos: 237 /Allgemein/A llgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_14763696959 06_0.docx @ 2265495 @ @ 1