NORDAC LINK (SK 250E-FDS ... SK 280E-FDS) – Users Manual for Frequency Inverters as Field Distributors
66 BU 0250 en-3021
Pos: 175 /Anleitungen/ Elektronik/F U und Starter/4. Inbetriebna hme/Inbetriebnah me Betriebsarten Motorregler (P300) [SK 1x0E, SK 2xxE, SK 5xxE]/Parameter übersicht Reglereins tellung [SK 2xxE, SK 5xxE, SK 2xxE-FDS] @ 6\mod_142106 7020960_388.doc x @ 198341 @ 3 @ 1
4.3.2 Overview of control parameter settings
The following provides an overview of all parameters which are of importance, depending on the
selected operating mode. Among other things, a distinction is made between "relevant" and
"important", which provides an indication of the required precision of the particular parameter setting.
However, in principle, the more precisely the setting is made, the more exact the control, so that
higher values for dynamics and precision are possible for the operation of the drive unit. A detailed
description of these parameters can be found in Section 5 "Parameter".
Parameter has no significance
Leave the parameter in the factory setting
Setting of the parameter is relevant
Setting of the parameter is important
Group Parameter Operating mode
VFC open-loop CFC open-loop CFC closed-loop
ASMs PMSMs ASMs PMSMs ASMs PMSMs
Motor data
For V/f characteristic curve: precise matching of the parameter is important.
For V/f characteristic curves: typical setting "0"
Pos: 176 /Allgemein/A llgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_14763696959 06_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
