Nord Drivesystems SK 200E Series User Manual

6 Parameters
BU 0210 en-3117 73
P631 Slip error. Abs./inc. S
Setting range
0.00...99.99 rev
Factory setting
{ 0 }
Description
Permissible deviation of the measured positions between the absolute encoder and
the incremental encoder. The error message E14.6 becomes active if the permissible
deviation is exceeded.
Setting values
0 = Monitoring is disabled
Pos: 32 0 /Anlei tung en/El ektr onik/FU und Star ter/5 . Par ameter/ Par ameter aufli stung (P000 .. .)/POS ICON/ Saf ety/P 600 bis P6 99 (POS ICON) /P64 0 - Ein heit Pos . Wert e @ 14\mod_1479908489696_388.docx @ 2307754 @ @ 1
P640 Unit of pos. value S
Setting range
0 … 9
Factory setting
{ 0 }
Description
Assignment of a measurement unit for the position values.
Note
For details see  Section 4.5 "Speed ratio of setpoint and actual values"
Setting values
Value Meaning
Pos: 32 1 /Anlei tung en/El ektr onik/FU und Star ter/5 . Par ameter/ Par ameter aufli stung (P000 .. .)/POS ICON/ Saf ety/P 600 bis P6 99 (POS ICON) /P64 0 - Ein hei t Pos .W ert e_Ein st ellw ert e @ 1 4\mod_1479908495503_388.docx @ 2307789 @ @ 1
0
rev
Rotations
1 °
Degrees
2 rad
Radians
3
mm
Millimetres
4
cm
Centimetres
5 dm
Decimetres
6 m
Metres
7
in
Inch
8
ft
Feet
9 (no unit)
No unit
Pos: 325 /A nleit ung en/El e ktr onik /POS ICON /7. S tör ungs mel dung en /!M eld ung en zu m B etri ebsz ust and @ 1 4\mod_1478870759752_388.docx @ 2303 344 @ 1 @ 1

Nord Drivesystems SK 200E Series Specifications

General

Brand	Nord Drivesystems
Model	SK 200E Series
Category	Inverter
Language	English