Northern Meditec Taurus E - Page 104

文件编号：NR-TP-0715-008 版本：1.0
- 92 -
Source
Alarm message
L
Causes and countermeasures
category and alarm limit settings are appropriate for
the patient.
PR Too High
SpO2 value is higher than the upper alarm limit or
lower than the lower alarm limit. Check the patient's
physiological condition, and check if the patient
category and alarm limit settings are appropriate for
the patient.
PR Too Low
NIBP
NIBP signal weak
M*
NIBP value is higher than the upper alarm limit or
lower than the lower alarm limit. Check the patient's
physiological condition, and check if the patient
category and alarm limit settings are appropriate for
the patient.
NIBP-Sys Too High
NIBP-Sys Too Low
NIBP-Mean Too High
NIBP-Mean Too Low
NIBP-Dia Too High