Novatech Kronos 2 Series - Port B Settings; Figure 20: Port B Settings; Table 8: Port a Settings; Table 9: Port B Settings

Kronos Series 3
29
Item
Description
IP address
IP address of port A
Netmask
Netmask of port A
Allow to change the
IP address of this
port using the
rotary knob on the
front panel
If checked (enabled), the rotary knob can be used to change the IP address
of port A.
If not checked (disabled), the rotary knob cannot be used to change the IP
address of port A.
Default: Enabled.
Table 8: Port A settings
4.5.3 Port B Settings
Set the IP address and redundancy of port B on the following tab.
Figure 20: Port B settings
Item
Description
Redundancy B
Set the redundancy for port B.
NONE Port B does not provide redundancy.
PRP Port B provides PRP redundancy on two SFP slots.
HSR Port B provides HSR redundancy on two SFP slots.
IP address
IP address of port B
Netmask
Netmask of port B
Table 9: Port B settings