Kronos Series 3
59
Antenna
The antenna has the following specifications and measurements.
▪ Multi-constellation: GPS, Glonass, Galileo, Beidou
▪ High gain, low noise, high out-of-band rejection, robust anti-jamming design
▪ 50Ω impedance
▪ TNC connector
▪ Peak gain 33.5dB ±3dB
▪ 3.0-5.0V operating voltage
▪ 9.0mA ±3mA current consumption
▪ Temperature range: -40°C to +85°C
▪ Relative humidity up to 95%
▪ Ruggedized IP 67 enclosure
▪ Built-in lightning protection meets/exceeds of IEC 61000-4
Figure 31: Antenna measurements
Antenna Mount
The antenna has a threaded base that allows mounting on a 1”-14” straight thread or a 3/4” pipe thread.
The antenna mount allows mounting on walls as well as on poles. All measurements are shown in inches.
Figure 32: Antenna mount (3D view)
To Next Page
Loading...