Nuvoton NuEclipse - Figure 4-3 Target Processor Settings

NuEclipse
Apr. 25, 2022 Page 14 of 57 Rev 1.02.019
NU
ECLIPSE USER MANUAL
Based on the actual target chip, we select the corresponding chip series. For some chip series, e.g.,
M2351_NonSecure, we need to input the additional library path. If not, the build process may fail. In
addition, input the real values to Flash and RAM size. If not, the default values will be used. When all
the settings are done, click the Next > buttons until clicking the Finish button.
Figure 4-3 Target Processor Settings