108 Quadro Workstation User’s Guide
Chapter 7
Configuring Key ForceWare Graphics Driver Features
Adding a New Application Profile
You can add new application profiles, which you can also delete. To add a new
application profile, follow these steps:
1 Set the Active profile list to Global driver settings.
2 Click Apply.
3 Click Add to display the Add Profiles dialog box.
Note: If you don’t intend to associate specific applications with this profile, make
sure that the Global driver settings check box is checked.
4 If you want to associate one or more applications with the profile you are adding,
select the check boxes for those applications. You can click the Browse button to
locate applications that may not appear in the list.
5 Enter a name for the profile you are adding in the Profile text entry box, as shown
in the left image in Figure 7.7.
Figure 7.7
Adding a Profile
QuadroGuide_.book Page 108 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
