64 Quadro Workstation User’s Guide
Chapter 5
Configuring Displays
If you have more than one display connected, follow these steps.
1 Click nView Display Settings from the NVIDIA display menu.
2 Left click on the display image that represents your analog display to select it.
3 Right click on that display image and click Device Adjustments to open the
Device Adjustment page (Figure 5.1), which contains the Screen Adjustment
and the Display Timing pages.
For details, see Screen Adjustment and Display Timing Settings in the next
sections.
Screen Adjustment
The Screen Adjustment page is shown in Figure 5.1.
To adjust the screen position on your analog display, use the arrow positioning
buttons for fine adjustments.
Figure 5.1
Screen Adjustment Settings — Analog Display
QuadroGuide_.book Page 64 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
