NVIDIA Corporation 175
Chapter 9
Using NVIDIA Scalable Link Interface (SLI)
SLI Antialiasing Mode
To use SLI antialiasing, perform the following steps.
1 Enable SLI antialiasing.
a Open the Performance & Quality Settings page.
b From the Active profile list, select Global driver settings.
c From the Global driver settings View list, select Advanced settings.
d From the Global driver settings list box, select SLI rendering and then choose
SLI antialiasing.
e Click Apply.
2 Select an SLI antialiasing setting.
a From the Global driver settings list box, select Antialiasing settings.
b Adjust the SLI antialiasing settings slider to the desired antialiasing level., then
click Apply.
QuadroGuide_.book Page 175 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
