Nvidia Quadro Workstation - Disabling Auto-Panning (Lock Pan Position)

58 Quadro Workstation User’s Guide
Chapter 4
Using nView Multi-Display Settings
desktop on your secondary display (i.e., display 1b) to pan and scan the
desktop, thus enabling the Virtual Desktop feature.
Disabling Auto-Panning (Lock Pan Position)
Disabling the pan and scan feature (virtual desktop) results in locking the current
pan position on the secondary clone display, letting you effectively freeze the virtual
desktop at a certain position, which is useful for presentations or fine-detail work in
applications.
If you want to disable the auto-panning on your secondary display, you do one of the
following:
• Select the check box labeled Disable auto-panning on secondary device
(viewport lock) or simply
• Select the Lock Pan Position check box on the popup menu on your secondary
display (i.e., display 1b.)
The example in Figure 4.18 shows that the Lock Pan Position check box is selected,
Figure 4.18 nView Clone Mode with Virtual Desktop Enabled — Disabling Panning
Disabling desktop
panning of the
secondary display
= Lock Pan Position
QuadroGuide_.book Page 58 Monday, April 3, 2006 12:21 PM