NVIDIA Corporation 57
Chapter 4
Using nView Multi-Display Settings
Figure 4.17
Configuring Screen Resolution for Virtual Desktop — From nView Display
Settings Page
4 Use the Screen resolution slider to set the resolution so that the primary display’s
resolution is greater than the secondary display’s resolution.
Note: If you set the same screen resolution value for both primary and secondary
displays, you cannot pan/scan the desktop area on the secondary display;
both displays will remain static.
5 Use the Screen resolution slider to set the resolution so that the primary display’s
resolution is greater than the secondary display’s resolution.
Note: If you set the same screen resolution value for both primary and secondary
displays, you cannot pan/scan the desktop area on the secondary display;
both displays will remain static.
6 Optional: If you want, you can select a refresh rate from the list box.
7 Click Apply and OK close the Screen Resolution & Refresh Rates page and return
to the nView Display Settings page.
Note: Now that you have adjusted the screen resolutions, notice that you can
move your mouse horizontally and/or vertically all the way across the
QuadroGuide_.book Page 57 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
