16 Quadro Workstation User’s Guide
Chapter 2
System Requirements
Notes on Feature and Configuration Support
Feature Support
• To access features on the nView Display Settings page (see “nView Display
Modes” on page 33), you need:
• a multi-display graphics card based on any of the NVIDIA GPUs that support
multiple displays on a single graphics card, as indicated in “Hardware —
Supported NVIDIA Products” on page 8, and
• at least two displays connected to the graphics card.
• When running with multiple graphics cards (i.e., two or more NVIDIA GPU-based
graphics card are installed in your computer), ensure that the same version of the
NVIDIA ForceWare graphics display driver is installed for each card. For a
detailed discussion of using multi-display nView modes, see “Using nView Multi-
Display Settings” on page 33.
• Some NVIDIA display and nView Desktop Manager features are supported by
either single-display or multi-display NVIDIA GPU-based graphics cards.
Therefore, to access features that are supported by single-display configurations,
you only need a singe display connected, provided that the particular NVIDIA
GeForce-based graphics card supports these features.
• The settings available on the NVIDIA display control panel pages may vary
depending on the specific NVIDIA GeForce GPU-based graphics card you are
using. For example, settings that are available for a specific graphics card such as
one that is GeForce 7800 GTX-based, may not be available on a graphics card
based on a GeForce4 Ti- or other older NVIDIA GeForce GPU series.
QuadroGuide_.book Page 16 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
