54 Quadro Workstation User’s Guide
Chapter 4
Using nView Multi-Display Settings
Figure 4.14
nView Clone Mode — Analog + Digital Displays with Context Menus
From the Windows Display Properties Settings page, if you click Identify when
you are in nView Clone mode, you will see the same number on both your
displays.
Figure 4.15 shows nView Clone mode using a digital display as a primary display
and a TV as a secondary display.
Context menu for the
secondary display in
nView Clone mode.
Context menu for the primary display in
nView Clone mode.
QuadroGuide_.book Page 54 Monday, April 3, 2006 12:21 PM
To Next Page
Loading...
