LPC5411x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2018. All rights reserved.
Product data sheet Rev. 2.1 — 9 May 2018 19 of 105
NXP Semiconductors
LPC5411x
32-bit ARM Cortex-M4/M0+ microcontroller
PIO1_13 - 54
[2]
PU I/O PIO1_13 — General-purpose digital input/output pin.
R — Reserved.
I/O FC5_TXD_SCL_MISO — Flexcomm Interface 5: USART TXD, I2C SCL, SPI MISO.
O CTimer1_MAT1 — 32-bit CTimer1 match output 1.
I/O FC7_RXD_SDA_MOSI_DATA — Flexcomm Interface 7: USART RXD, I2C SDA,
SPI MOSI, I2S DATA.
PIO1_14 - 57
[2]
PU I/O PIO1_14 — General-purpose digital input/output pin.
R — Reserved.
I/O FC2_RXD_SDA_MOSI — Flexcomm Interface 2: USART RXD, I2C SDA, SPI
MOSI.
O SCT0_OUT7 — SCT0 output 7. PWM output 7.
I/O FC7_TXD_SCL_MISO_WS — Flexcomm Interface 7: USART TXD, I2C SCL, SPI
MISO, I2S WS.
PIO1_15 - 62
[2]
PU I/O PIO1_15 — General-purpose digital input/output pin.
O PDM0_CLK — Clock for PDM interface 0, for digital microphone.
O SCT0_OUT5 — SCT0 output 5. PWM output 5.
I CTimer1_CAP3 — 32-bit CTimer1 capture input 3.
I/O FC7_CTS_SDA_SSEL0 — Flexcomm Interface 7: USART CTS, I2C SDA, SPI
SSEL0.
PIO1_16 - 7
[2]
PU I/O PIO1_16 — General-purpose digital input/output pin.
I PDM0_DATA — Data for PDM interface 0, digital microphone input.
O CTimer0_MAT0 — 32-bit CTimer0 match output 0.
I CTimer0_CAP0 — 32-bit CTimer0 capture input 0.
I/O FC7_RTS_SCL_SSEL1 — Flexcomm Interface 7: USART RTS, I2C SCL, SPI
SSEL1.
PIO1_17 - 10
[2]
PU I/O PIO1_17 — General-purpose digital input/output pin.
R — Reserved.
R — Reserved.
R — Reserved.
I/O MCLK — MCLK input or output for I2S and/or digital microphone.
I UTICK_CAP3 — Micro-tick timer capture input 3.
USB_DP D2 5
[6]
F I/O USB0 bidirectional D+ line.
USB_DM D1 6
[6]
F I/O USB0 bidirectional D- line.
RESETN G1 64
[5]
PU I External reset input: A LOW on this pin resets the device, causing I/O ports and
peripherals to take on their default states, and processor execution to begin at
address 0. Wakes up the part from deep power-down mode.
RTCXIN A7 33 - - RTC oscillator input.
RTCXOUT B7 35 - - RTC oscillator output.
VREFP B4 22 - - ADC positive reference voltage.
Table 4. Pin description
…continued
Symbol
49-pin
64-pin
Reset state
[1]
Type
Description
To Next Page
Loading...
