NXP Semiconductors MPC5777M - Page 73

Electrical characteristics
MPC5777M Microcontroller Data Sheet, Rev. 6
NXP Semiconductors 73
C
ac_tx
SR Transmit Lane External AC Coupling
Capacitance
Values are nominal, valid
for +/– 50% tolerance
250 — 2000 pF
Receiver
F
RX
CC Receive Clock Rate T
J
= 150 °C — — 1.25 Gbps
V
I_L
 SR Differential input voltage (peak to peak) — 200 — 1000 mV
R
V_L_Rx
CC Differential Terminating resistance — 81 100 120 
1
All Aurora electrical characteristics are valid from –40 °C to 150 °C, except where noted.
2
All specifications valid for maximum transmit data rate F
TX
.
3
The minimum value of 400 mV is only valid for differential terminating resistance (R
V_L
) = 99 ohm to 101 ohm. The
differential output voltage swing tracks with the value of R
V_L
.
4
Transmission line loss maximum value is specified for the maximum drive level of the Aurora transmit pad.
Table 34. Aurora LVDS electrical characteristics
1,2
(continued)
Symbol Parameter Conditions
Value
Unit
Min Typ Max