NXP Semiconductors MPC5777M - Pin;ball descriptions; Power supply and reference voltage pins;balls

MPC5777M Microcontroller Data Sheet, Rev. 6
Package pinouts and signal descriptions
NXP Semiconductors14
2.2 Pin/ball descriptions
The following sections provide signal descriptions and related information about device functionality and configuration.
2.2.1 Power supply and reference voltage pins/balls
Table 2 contains information on power supply and reference pin functions for the devices.
NOTE
All ground supplies must be tied to ground. They can NOT float.
Table 2. Power supply and reference pins
Supply BGA ball
Symbol Type Description 416PD 416ED 512PD 512ED
V
SS_HV
Ground High voltage ground A26, B25, C24, D23,
D15, D8, J4, L23,
R23, T4, W23, AC23,
AC19
B2, B29, B30, F6,
F25, G7, G24, H29,
H30, J9, J22, K10,
K21,V29, AA21,
AB22, AD24, AE25,
AJ10, AJ29, AK10
V
SS_LV
Ground Low voltage ground K10, K11, K12, K13,
K14, K15, K16, K17,
L10, L11, L12, L13,
L14, L15, L16, L17,
M10, M11, M12,
M13, M14, M15,
M16, M17, N10, N11,
N12, N13, N14,
N15,N 16, N17, P11,
P12, P13, P14, P15,
P16, R 11, R12, R13,
R14, R15, R16, T10,
T11, T12, T13, T14,
T15, T16, T17
M14, M15, M16,
M17, N14, N15,
N16, N17, P12, P13,
P15, P16, P18, P19,
R13, R14, R15,
R16, R17, R18,
T13,T14, T15, T16,
T17, T18, U12, U13,
U 15, U16, U18,
U19, V14, V15 V16,
V17, W14, W17
V
DD_LV
Power Low voltage power supply for
production device
(PLL is also powered by this pin.)
B26, C25, D9, D24,
E23, H4, P23, V23,
AB23, AC20
M18, N19, V12,
V19, W13, W18
V
DD_LV_BD
Power Low voltage power supply for
buddy die
—R1, R4— M13,
N12
V
DD_HV_PMC
Power High voltage power supply for
internal power management unit
D14 —
V
DD_HV_IO_MAIN
Power High voltage power supply for I/O A25, B24, C23, D22,
K4, AC16, AD16,
AE16, AF16
A2, A29, B3, B28,
F7, F24, G8, G23,
AC24, AD25, AH29,
AJ30
V
DD_HV_IO_BD
Power High voltage power supply for
buddy die I/O
— P17 — R19
V
SS_HV_OSC
Ground Oscillator ground supply F25 T25
V
DD_HV_JTAG
Power JTAG/Oscillator power supply E26 V25