OHAUS MB45 - Display Adjustment

33
Section 5- Analyzer setup
5.9 Adjusting display contrast and brightness
This menu permits adjusting the contrast and brightness levels on the display screen. To change the levels, proceed
as follows:
ANALYZER SETUP
Press the Setup button. Using the down arrow button, scroll to DISPLAY.
Press the Enter button.
DISPLAY ADJUST
Adjusting contrast
Using the up/down arrow buttons, adjust the screen contrast to the desired
level. The numeric value (0 to 100) is for reference only. Press the right
arrow button to advance to BRIGHT. Default = 40.
LANGUAGE
BEEPER
TIME-DATE
RS-232
PRINT
DISPLAY
CONTRAST: 60
BRIGHT: 10
EXIT WITHOUT SAVING
DISPLAY ADJUST
Adjusting brightness
Using the up/down arrow buttons, adjust the screen brightness to the desired
level. The numeric value (0 to 10) is for reference only. Press the Enter
button. Default = 10.
CONTRAST: 60
BRIGHT: 10
EXIT WITHOUT SAVING
Exit without saving
If you do not wish to save settings, Use the right arrow button and scroll to
EXIT WITHOUT SAVING and press the Enter button. The display returns to
ANALYZER SETUP.
DISPLAY ADJUST
CONTRAST: 60
BRIGHT: 10
EXIT WITHOUT SAVING